Overview

Sequence G: Upwind Teetered (F)

Test sequence G used an upwind, teetered turbine with a 0° cone angle. The wind speeds ranged from 5 m/s to 25 m/s. Yaw angles of ±180° were achieved at low wind speeds and angles of ±10° were achieved at the high wind speeds. The blade tip pitch was 3°. The rotor rotated at 72 RPM. Blade and probe pressure measurements were collected.

Data Details

File naming information can be found in the attached Word document "Sequence G Filename Key", copied from the Phase VI Test Report.